 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| features 1. extremely light weight the typical version, with all 51 contacts loaded, weights only 0.1 grams. 2. easy solderability on the pc board the soldering leads are on 0.6 mm pitch, exiting on front and back of the connector. 3. conductive traces on the pcb can run under the connector no exposed contacts on the bottom of the connector. 4. easy fpc insertion and reliable electrical connection proven flip lockr actuator allows easy insertion of fpc. tactile sensation when fully closed confirms complete electrical and mechanical connection. 5. accepts standard thickness fpc 0.2mm thick standard flexible printed circuit board can be used. this is the only ultra-low profile zif connector allowing the use of standard fpc. 6. board placement with automatic equipment flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. standard reel contains 5,000 connectors. 7. the connector does not use chlorine and bromine exceeding standard limits. (fh26w series) * defined in accordance with iec61249-2-21 br 900ppm or lower, cl 900ppm or lower, br + cl 1,500ppm or lower 8. available for 500 pieces packaging although the normal product is 5,000 pieces per reel, 500 winds per reel is also available. (emboss reel external diameter is ?180mm.) 1 2010.9 16.8mm space saving(51 pos. shown) can be mounted over conductive traces. metal fittings do no protrude outside of the connector body no exposed contacts on the bottom of the connector 1.0mm 3.2mm fpc fpc actuator actuator actuator fpc operation (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected (3) close the actuator (4) fpc connected q w r e 0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors fh26 series (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc (1) actuator open (2) insert fpc t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n .
2 fh26 series0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors ul94hb --------------- --------------- temperature: -55 ? / +15? to +35?/+85? /+15? to +35? time: 30 / 2 to 3 / 30 / 2 to 3 (minutes) 5 cycles reflow: at the recommended temperature profile manual soldering: 350? +/-10? for 51 seconds 1 ma 10 cycles 50 m ohms min. no flashover or insulation breakdown. 100 v dc 90 v ac /one minute 100 m ohms max. * including fpc conductor resistance contact resistance: 100 m ohms max. no damage, cracks, or parts dislocation. no electrical discontinuity of 1 s or more. contact resistance: 100 m ohms max. no damage, cracks, or parts dislocation. frequency: 10 to 55 hz, single amplitude of 0.75 mm, 10 cycles, 3 directions. no electrical discontinuity of 1 s. min. contact resistance: 100 m ohms max. no damage, cracks, or parts dislocation. acceleration of 981 m/s 2 , 6 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis contact resistance: 100 m ohms max. insulation resistance: 50 m ohms min. no affect on appearance or performance. 96 hours at temperature of 402? and humidity of 90% to 95%. contact resistance: 100 m ohms max. insulation resistance: 50 m ohms min. no damage, cracks, or parts looseness. no deformation of components affecting performance. materials ordering information fh 26 w - 51s - 0.3 shw ( 05 ) 1 4 5 2 3 6 7 part contacts metalfittings insulator phosphor bronze pa lcpcolor: black fh26 series: deep brown fh26w series: light brown gold plating pure tin reflow plating ul94v-0 material finish remarks specifications rating current rating 0.2a dc voltage rating 30v ac operating temperature range -55 ? to +85 ? (note 1) operating humidity range relative humidity 90% max. (no condensation) storage temperature range -10 ? to +50 ? (note 2) storage humidity range relative humidity 90% max. recommended fpc : thickness: = 0.2 0.03mm gold plated 4. durability (insertion/ withdrawal) 5. vibration 6. shock 7. humidity (steady state) 8. temperature cycle 9. resistance to soldering heat 3. contact resistance 1. insulation resistance 2. withstanding voltage item specification conditions note 1: includes temperature rise caused by current flow. note 2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. termination type shw: smt horizontal staggered mounting type specifications (05) gold plating, 5,000 pieces / reel (10) gold plating with nickel barrier, 5,000 pieces / reel (98) gold plating, 500 pieces / reel (99) gold plating with nickel barrier, 500 pieces / reel series name: fh series no.: 26 blank: standard w: satisfies halogen-free requirements (flame retardance ul94hb). number of positions: 13 to 71 contact pitch: 0.3mm 1 2 3 4 5 6 7 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 3 fh26 series 0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors b 0.6 0.3 c 0.6 (0.12) (1.25) (0.3) 3.2 0.5 1 1 0.1 0.1 1 0.3 a (0.12) number of contacts indicator (d: fpc insertion slot dimension) e 3.2 connector dimensions notes the coplanarity of each terminal lead within specified dimension is 0.1 mm max. packaged on tape and reel only. check packaging specification. slight variations in color of the plastic compounds do not affect form, fit or function of the connector. after reflow, the terminal plating may change color, however this does not represent a quality issue. 1 2 3 4 all dimensions: mm note1 : embossed tape reel packaging. order by number of reels. note2 : ** : specification. refer to ordering information. part number fh26-13s-0.3shw(**) fh26-15s-0.3shw(**) fh26-17s-0.3shw(**) fh26-21s-0.3shw(**) fh26-23s-0.3shw(**) fh26-25s-0.3shw(**) fh26-27s-0.3shw(**) fh26-29s-0.3shw(**) fh26-31s-0.3shw(**) fh26-33s-0.3shw(**) fh26-35s-0.3shw(**) fh26-37s-0.3shw(**) fh26-39s-0.3shw(**) fh26-41s-0.3shw(**) fh26-45s-0.3shw(**) fh26-51s-0.3shw(**) fh26-55s-0.3shw(**) fh26-57s-0.3shw(**) fh26-61s-0.3shw(**) fh26-71s-0.3shw(**) 580-0209-3-** 580-0218-4-** 580-0217-1-** 580-0207-8-** 580-0203-7-** 580-0208-0-** 580-0204-0-** 580-0216-9-** 580-0214-3-** 580-0210-2-** 580-0205-2-** 580-0224-7-** 580-0201-1-** 580-0206-5-** 580-0211-5-** 580-0200-9-** 580-0221-9-** 580-0212-8-** 580-0213-0-** 580-0202-4-** 13 15 17 21 23 25 27 29 31 33 35 37 39 41 45 51 55 57 61 71 cl no. number of contacts 5.4 6.0 6.6 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 15.0 16.8 18.0 18.6 19.8 22.8 a 3.0 3.6 4.2 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.6 14.4 15.6 16.2 17.4 20.4 b 3.6 4.2 4.8 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 13.2 15.0 16.2 16.8 18.0 21.0 c 4.23 4.83 5.43 6.63 7.23 7.83 8.43 9.03 9.63 10.23 10.83 11.43 12.03 12.63 13.83 15.63 16.83 17.43 18.63 21.63 d 4.9 5.5 6.1 7.3 7.9 8.5 9.1 9.7 10.3 10.9 11.5 12.1 12.7 13.3 14.5 16.3 17.5 18.1 19.3 22.3 e part number fh26w-13s-0.3shw(**) fh26w-15s-0.3shw(**) fh26w-17s-0.3shw(**) fh26w-19s-0.3shw(**) fh26w-21s-0.3shw(**) fh26w-23s-0.3shw(**) fh26w-25s-0.3shw(**) fh26w-27s-0.3shw(**) fh26w-29s-0.3shw(**) fh26w-31s-0.3shw(**) fh26w-33s-0.3shw(**) fh26w-35s-0.3shw(**) fh26w-37s-0.3shw(**) fh26w-39s-0.3shw(**) fh26w-41s-0.3shw(**) fh26w-45s-0.3shw(**) fh26w-51s-0.3shw(**) fh26w-57s-0.3shw(**) fh26w-61s-0.3shw(**) fh26w-71s-0.3shw(**) 580-2401-1-** 580-2402-4-** 580-2403-7-** 580-2437-9-** 580-2404-0-** 580-2405-2-** 580-2406-5-** 580-2400-9-** 580-2407-8-** 580-2408-0-** 580-2409-3-** 580-2410-2-** 580-2411-5-** 580-2412-8-** 580-2413-0-** 580-2414-3-** 580-2415-6-** 580-2417-1-** 580-2418-4-** 580-2419-7-** 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 45 51 57 61 71 cl no. number of contacts 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 12.6 13.2 13.8 15.0 16.8 18.6 19.8 22.8 a 3 3.6 4.2 4.8 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.6 14.4 16.2 17.4 20.4 b 3.6 4.2 4.8 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 13.2 15.0 16.8 18.0 21.0 c 4.23 4.83 5.43 6.03 6.63 7.23 7.83 8.43 9.03 9.63 10.23 10.83 11.43 12.03 12.63 13.83 15.63 17.43 18.63 21.63 d 4.9 5.5 6.1 6.7 7.3 7.9 8.5 9.1 9.7 10.3 10.9 11.5 12.1 12.7 13.3 14.5 16.3 18.1 19.3 22.3 e t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 4 fh26 series0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors (0.55:metal mask) (0.65:metal mask) (0.23:metal mask) (0.2) (0.45) 2.15 0.05 0.8 0.05 0.2 0.05 (0.23:metal mask) 0.95 0.05 0.6 0.05 0.5 0.05 0.4 0.05 (0.3:metal mask) (0.7:metal mask) 0.6 0.05 0.3 0.05 (3.6) 0.65 0.05 0.3 0.03 outline of the connector b 0.05 c 0.05 0.3 0.03 recommended metal mask thickness: t=0.1 recommended pcb mounting pattern and metal mask dimensions 0.6 0.07 (0.05) (0.15) 0.6 0.07 m (0.2) (0.07) 0.6 0.02 b 0.03 0.3 0.07 h c 0.03 3.5 min.(stiffener) 2.5 0.3 f 0.05 0.3 0.07 r0.2 max 0.3 0.1 0.3 0.02 0.2 0.03 1 0.1 1.1 0.1 2.1 0.1 2.25 0.1 0.3 +0.04 -0.03 0.3 +0.04 -0.03 0.1 0.02 (2.5) (0.5) (0.15) (0.2) 1 a b 10.1 1.10.1 00.03 relative positions of point-a dnd b (lead plated 0.1 max) recommended fpc dimensions detail h dimention m must be 0.5mm minimum when the stiffener is shorter than 3.5 min. 1 all dimensions: mm part number fh26-13s-0.3shw(**) fh26-15s-0.3shw(**) fh26-17s-0.3shw(**) fh26-21s-0.3shw(**) fh26-23s-0.3shw(**) fh26-25s-0.3shw(**) fh26-27s-0.3shw(**) fh26-29s-0.3shw(**) fh26-31s-0.3shw(**) fh26-33s-0.3shw(**) fh26-35s-0.3shw(**) fh26-37s-0.3shw(**) fh26-39s-0.3shw(**) fh26-41s-0.3shw(**) fh26-45s-0.3shw(**) fh26-51s-0.3shw(**) fh26-55s-0.3shw(**) fh26-57s-0.3shw(**) fh26-61s-0.3shw(**) fh26-71s-0.3shw(**) 580-0209-3-** 580-0218-4-** 580-0217-1-** 580-0207-8-** 580-0203-7-** 580-0208-0-** 580-0204-0-** 580-0216-9-** 580-0214-3-** 580-0210-2-** 580-0205-2-** 580-0224-7-** 580-0201-1-** 580-0206-5-** 580-0211-5-** 580-0200-9-** 580-0221-9-** 580-0212-8-** 580-0213-0-** 580-0202-4-** 13 15 17 21 23 25 27 29 31 33 35 37 39 41 45 51 55 57 61 71 cl no. number of contacts 3.0 3.6 4.2 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.6 14.4 15.6 16.2 17.4 20.4 b 3.6 4.2 4.8 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 13.2 15.0 16.2 16.8 18.0 21.0 c 4.2 4.8 5.4 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 12.6 13.8 15.6 16.8 17.4 18.6 21.6 f part number fh26w-13s-0.3shw(**) fh26w-15s-0.3shw(**) fh26w-17s-0.3shw(**) fh26w-19s-0.3shw(**) fh26w-21s-0.3shw(**) fh26w-23s-0.3shw(**) fh26w-25s-0.3shw(**) fh26w-27s-0.3shw(**) fh26w-29s-0.3shw(**) fh26w-31s-0.3shw(**) fh26w-33s-0.3shw(**) fh26w-35s-0.3shw(**) fh26w-37s-0.3shw(**) fh26w-39s-0.3shw(**) fh26w-41s-0.3shw(**) fh26w-45s-0.3shw(**) fh26w-51s-0.3shw(**) fh26w-57s-0.3shw(**) fh26w-61s-0.3shw(**) fh26w-71s-0.3shw(**) 580-2401-1-** 580-2402-4-** 580-2403-7-** 580-2437-9-** 580-2404-0-** 580-2405-2-** 580-2406-5-** 580-2400-9-** 580-2407-8-** 580-2408-0-** 580-2409-3-** 580-2410-2-** 580-2411-5-** 580-2412-8-** 580-2413-0-** 580-2414-3-** 580-2415-6-** 580-2417-1-** 580-2418-4-** 580-2419-7-** 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 45 51 57 61 71 cl no. number of contacts 3.0 3.6 4.2 4.8 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.6 14.4 16.2 17.4 20.4 b 3.6 4.2 4.8 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 13.2 15.0 16.8 18.0 21.0 c 4.2 4.8 5.4 6.0 6.6 7.2 7.8 8.4 9.0 9.6 10.2 10.8 11.4 12.0 12.6 13.8 15.6 17.4 18.6 21.6 f t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 5 fh26 series 0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors recommended fpc construction 1. using single-sided fpc material name covering film layer. cover adhesive surface treatment copper foil base adhesive base film reinforcement material adhesive stiffener polyimide 1 mil thick. 1m to 5m nickel underplated 0.2m gold plated cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 3 mil thick total 25 25 3 35 25 25 40 75 203 material thickness (m) 2. using double-sided fpc material name back side covering layer film cover adhesive surface treatment through-hole copper copper foil base adhesive base film base adhesive copper foil cover adhesive covering layer film reinforcement material adhesive stiffener polyimide 1 mil thick 1m to 5m nickel underplated 0.2m gold plated cu cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive cu 1/2oz thermosetting adhesive polyimide 1 mil thick thermosetting adhesive polyimide 1 mil thick total 25 25 3 15 18 18 25 18 18 25 25 25 25 197 material thickness (m) to prevent release of the fpc due to it's bending, use of double sided fpc with copper foil on the back side is not recommended . contact fpc manufacturer for specific details. back side connecting side connecting side 1. this specification is a recommendation for the construction of the fh26 series fpc and ffc (t=0.2 0.03). 2. for details about the construction, please contact the fpc/ffc manufacturers. 3. precautions t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 6 fh26 series0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors (l : inside) (m : outside) (?13) (?380) (?80) lead section (400mm min.) end section mounting section connectors top cover tape embossed carrier tape blank section blank section (10 pockets min.) (10 pockets min.) unreeling direction reel dimensions packaging specification embossed carrier tape dimensions (tape width of 24mm max.) embossed carrier tape dimensions (tape width of 32mm min.) unreeling direction flat surface, for placement with automatic equipment (1.6) (0.3) 40.1 20.15 80.1 1.750.1 j0.1 g0.3 (k) (1.25) (4.55) (3.05) ?1.5 +0.1 0 flat surface, for placement with automatic equipment unreeling direction (1.6) (0.3) 1.750.1 j0.1 g0.3 h0.1 (k) (1.25) (4.55) (3.05) ?1.5 +0.1 0 1.5 +0.1 0 1.7 +0.15 0 t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 7 fh26 series 0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors recommended temperature profile hrs test conditions solder method :reflow, ir/hot air environment :room air solder composition :paste, 96.5%sn/3.0%ag/0.5%cu (senju metal industry, co., ltd.'s part number: m705-221cm5-32-10.5) test board : glass epoxy 25mm 50mm 0.8mm thick land dimensions :0.3mm 0.65mm, 0.3mm 0.8mm metal mask :0.23 0.55 0.1mm thick, 0.23 0.65 0.1mm thick the temperature profiles are based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult your solder paste and equipment manufacturer for specific recommendations. max 250? start (?) time (seconds) 60 25? (60sec.) (60sec.) 90 sec. to 120 sec. preheating soldering 0 50 100 150 150? 200? 230? 200 250 120 temperature all dimensions: mm part number fh26-13s-0.3shw(**) fh26-15s-0.3shw(**) fh26-17s-0.3shw(**) fh26-21s-0.3shw(**) fh26-23s-0.3shw(**) fh26-25s-0.3shw(**) fh26-27s-0.3shw(**) fh26-29s-0.3shw(**) fh26-31s-0.3shw(**) fh26-33s-0.3shw(**) fh26-35s-0.3shw(**) fh26-37s-0.3shw(**) fh26-39s-0.3shw(**) fh26-41s-0.3shw(**) fh26-45s-0.3shw(**) fh26-51s-0.3shw(**) fh26-55s-0.3shw(**) fh26-57s-0.3shw(**) fh26-61s-0.3shw(**) fh26-71s-0.3shw(**) 580-0209-3-** 580-0218-4-** 580-0217-1-** 580-0207-8-** 580-0203-7-** 580-0208-0-** 580-0204-0-** 580-0216-9-** 580-0214-3-** 580-0210-2-** 580-0205-2-** 580-0224-7-** 580-0201-1-** 580-0206-5-** 580-0211-5-** 580-0200-9-** 580-0221-9-** 580-0212-8-** 580-0213-0-** 580-0202-4-** 13 15 17 21 23 25 27 29 31 33 35 37 39 41 45 51 55 57 61 71 7.5 7.5 7.5 7.5 7.5 7.5 7.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 14.2 14.2 20.2 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 28.4 28.4 28.4 40.4 16 16 16 16 16 16 16 24 24 24 24 24 24 24 24 24 32 32 32 44 5.6 6.2 6.8 8.0 8.6 9.2 9.8 10.4 11.0 11.6 12.2 12.8 13.4 14.0 15.2 17.0 18.2 18.8 20.0 23.0 17.4 17.4 17.4 17.4 17.4 17.4 17.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 33.4 33.4 33.4 45.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 37.4 37.4 37.4 49.4 cl no. number of contacts j h g k l m part number fh26w-13s-0.3shw(**) fh26w-15s-0.3shw(**) fh26w-17s-0.3shw(**) fh26w-19s-0.3shw(**) fh26w-21s-0.3shw(**) fh26w-23s-0.3shw(**) fh26w-25s-0.3shw(**) fh26w-27s-0.3shw(**) fh26w-29s-0.3shw(**) fh26w-31s-0.3shw(**) fh26w-33s-0.3shw(**) fh26w-35s-0.3shw(**) fh26w-37s-0.3shw(**) fh26w-39s-0.3shw(**) fh26w-41s-0.3shw(**) fh26w-45s-0.3shw(**) fh26w-51s-0.3shw(**) fh26w-57s-0.3shw(**) fh26w-61s-0.3shw(**) fh26w-71s-0.3shw(**) 580-2401-1-** 580-2402-4-** 580-2403-7-** 580-2437-9-** 580-2404-0-** 580-2405-2-** 580-2406-5-** 580-2400-9-** 580-2407-8-** 580-2408-0-** 580-2409-3-** 580-2410-2-** 580-2411-5-** 580-2412-8-** 580-2413-0-** 580-2414-3-** 580-2415-6-** 580-2417-1-** 580-2418-4-** 580-2419-7-** 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 45 51 57 61 71 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 14.2 14.2 20.2 ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- ---- 28.4 28.4 40.4 16 16 16 16 16 16 16 16 24 24 24 24 24 24 24 24 24 32 32 44 5.6 6.2 6.8 7.4 8.0 8.6 9.2 9.8 10.4 11.0 11.6 12.2 12.8 13.4 14.0 15.2 17.0 18.8 20.0 23.0 17.4 17.4 17.4 17.4 17.4 17.4 17.4 17.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 33.4 33.4 45.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 21.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 29.4 37.4 37.4 49.4 cl no. number of contacts j h g k l m t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 8 fh26 series0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors operation and precautions operation 1.fpc insertion procedure. connector installed on the board. lift up the actuator. use thumb or index finger. 1 2.fpc removal lift up the actuator. carefully withdraw the fpc. 1 fully insert the fpc in the connector parallel to mounting surface, with the exposed conductive traces facing down. 2 rotate down the actuator until firmly closed. it is critical that the inserted fpc is not moved and remains fully inserted. 3 fpc conductor surface (bottom side) t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 9 fh26 series 0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors precautions exercise care when handling connectors. follow recommendations given below. pc board flexing s pc board connector mounting area the connectors are straight within 0.1 mm max. make sure that the pc board connector mounting area flatness can accept the connector terminals without causing any failure of the solder joints. s handling before mounting on pcb insertion of the fpc or operation of the actuator prior to mounting on the pcb is not recommended. s pc board handling exercise caution when handling boards with the connectors installed. do not apply any forces affecting soldered joints. precautions when inserting or coupling fpc pay attention to the following points when inserting fpc. s actuator operation do not apply excessive force when opening the actuator prior to fpc insertion. when opening make sure that the force is applied only to the actuator itself, avoiding touching of the contacts. connector pcb damage assure free rotation of the actuator 1 axis of rotation 2 axis of rotation damage to the contacts actuator t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 10 fh26 series0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors precautions the actuator will rotate 135 degrees maximum. do not apply force to rotate further. (1n max.) 3 when operating the actuator, do so at the center portion. 4 135? as illustrated, do not attempt removal or re- positioning of the actuator. 5 s fpc insertion q the fpc should be aligned parallel with the board surface and perpendicular with the connector (as shown), then completely inserted. to assure correct electrical and mechanical connection do not insert fpc at angle. it must be fully inserted. make sure that the fpc is not moved during the closing of the actuator. perpendicular with the connector t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 11 fh26 series 0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors precautions s verification of the fully closed actuator. the actuator should be fully closed (as illustrated) and the fpc held firmly in the connector. do not press against the actuator when is fully closed. max force applied to the fully closed actuator should not exceed 1 n. *to avert insertion of the fpc on an angle, consideration should be given to securing fpc insertion space at the time of board layout. insertion will be difficult when the fpc is too short. *contact the fpc manufacturer for information about the bending specifications. routing the fpc (fpc fully inserted/ actuator closed) s fpc load do not apply force in excess of 0.05n/pin max. in the upward direction (as illustrated). do not bend the fpc too close to the actuator. load: 0.05n/pin max. s fpc insertion w do not insert the fpc at any angle from above. as illustrated, angle insertion may cause electrical discontinuity when the fpc is deflected in use. t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . 12 fh26 series0.3mm contact pitch, 1mm above the board, flexible printed circuit zif connectors precautions removing the fpc rotate the actuator to the open position (maximum open angle of 135). carefully withdraw the fpc. other precautions s hand soldering precautions when hand soldering: do not perform reflow or hand soldering with the fpc inserted in the connector. do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. do not use excessive amount of solder or flux compounds. operation of the actuator and contacts may be affected by excessive amounts of solder or flux compounds. 135? 1 2 3 the contents of this catalog are current as of date of 09/2010. contents are subject to change without notice for the purpose of improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-5300, fax: 81-3-3495-5230 http://www.hirose.com http://www.hirose-connectors.com t h e p r o d u c t i n f o r m a t i o n i n t h i s c a t a l o g i s f o r r e f e r e n c e o n l y . p l e a s e r e q u e s t t h e e n g i n e e r i n g d r a w i n g f o r t h e m o s t c u r r e n t a n d a c c u r a t e d e s i g n i n f o r m a t i o n . |
Price & Availability of H26-13S-03SHW10
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |